BFSWM - ISOPROPYL ALCOHOL;TT-I-735A GRADES A&B

  • MSDS: BFSWM
  • Manufacturer: OCTAGON PROCESS INC
  • Product Name: ISOPROPYL ALCOHOL;TT-I-735A GRADES A&B
  • National Stock Number: 6810-00-855-1158
Product Identification

Product ID:ISOPROPYL ALCOHOL;TT-I-735A GRADES A&B
MSDS Date:10/07/1985
FSC:6810
NIIN:00-855-1158
MSDS Number: BFSWM

Responsible Party
OCTAGON PROCESS INC.
596 RIVER ROAD
EDGEWATER, NJ 07020-1105
US

Emergency Phone: 201-945-9400

Info Phone: 201-945-9400

Cage: 82925

Contractor
OCTAGON PROCESS INC.
EDGEWATER, NJ 07020 US

Telephone: 201-945-9400

Cage: 82925

Ingredients

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 100.0%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT) = 5840 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE MAY LEAD TO CNS
DEPRESSION, LEADING TO HEADACHES AND DIZZINESS. EYE: MAY LEAD TO
IRRITATION AND WILL INJURE EYE TISSUE IF NOT REMOVED PROMPTLY.
SKIN: NO HEALTH HAZARD FROM ABSORPTI ON OR EXPOSURE. INGESTION:
SLIGHT HEALTHHAZARD. CHRONIC: PROLONGED EXPOSURE CAN BE IRRITING TO
MUCOUS MEMBRANES.
Explanation of Carcinogenicity:DATA PER MSDS
Effects of Overexposure:OVEREXPOSURE MAY LEAD TO DIZZINESS, SHORTNESS
OF BREATH, HEADACHES, DERMATITIS AND EYE IRRITATION. HIGH VAPOR
CONCENTRATIONS ARE ANESTHETIC AND MAY HAVE OTHER CENTRAL NERVOUS
SYSTEM EFFECTS.
Medical Cond Aggravated by Exposure:PERSONS WITH SKIN, HEART,
RESPIRATORY, OR ANY OTHER MEDICAL CONDITION SHOULD USE CAUTION WHEN
HANDLING OR USING THIS PRODUCT.

First Aid

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER.
GET MEDICAL ATTENTION AS REQUIRED. INHALATION: IMMEDIATELY REMOVE
VICTIUM TO FRESH AIR. GIVE OXYGEN OR ARTIFICIAL RESPIRATION AS
NEEDED. G ET PROMPT MEDICAL ATTENTION. EYE: IMMEDIATELY FLUSH WITH
WATER FOR 20 MINUTES WITH EYELIDS HELD OPEN. GET PROMPT MEDICAL
ATTENTION. INGESTION: GET PROMPT MEDICAL ATTENTION. DO NOT INDUCE
VOMITING.

Fire Fighting

Flash Point Method:TCC
Flash Point:53.0F,11.7C
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR. THEY MAY
TRAVEL TO LOW AREAS THEN FLASH BACK FROM AN IGNITION SOURCE.

Accidental Release

Spill Release Procedures:FIRE HAZARD: ELIMINATE ALL SOURCES OF
IGNITION. EVACUATE AREA. VENTILATE AREA. STOP RELEASE. DIKE TO
CONTAIN SPILL. WEAR PROPER SAFETY EQUIPMENT. IF AMOUNT IS LARGE,
REMOVE LIQUID BY VACUUM. IF SMALL, ABSORB ON INERT MATERIAL.
DISPERSE RESIDUE.
Neutralizing Agent:DILUTE WITH WATER

Handling

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS
AWAY FROM HEAT, SPARKS, OPEN FLAME & STRONG OXIDIZING AGENTS. EMPTY
CONTAINERS MAY CONTAIN FLAMMABLE VAPOR.
Other Precautions:DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND, OR EXPOSE CONTAINERS TO HEAT, FLAME, SPARKS, STATIC
ELECTRICITY, OR OTHER SOURCES OF IGNITION. MATERIAL MAY ATTACK SOME
FORMS OF PLASTIC, ALU MINUM, RUBBER AND COATINGS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
VAPOR CARTRIDGE OR SUPPLIED AIR RESPIRATOR IF EXPOSED ABOVE
PEL/TLV.
Ventilation:USE GENERAL OR LOCAL EXHAUST AS NEEDED TO REDUCE EXPOSURES
TO BELOW PEL/TLV.
Protective Gloves:IMPERVIOUS;RUBBER,VINYL
Eye Protection:CHEMICAL SPLASH GOGGLES &/OR FACESHIELD
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWERS SHOULD BE
AVAILABLE IN THE IMMEDIATE VICINITY OF ANY POTENTIAL EXPOSURE.
Work Hygienic Practices:WASH HANDS BEFORE EATING, DRINKING, SMOKING, OR
USING TOILET FACILITIES. WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
AVOID CONTACT WITH EYES AND SKIN.DO NOT BREATHE VAPORS/MIST.DO NOT TAKE
INTERNALLY.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:180F/82C
Melt/Freeze Pt:M.P/F.P Text:-127F,-88C
Vapor Pres:33 MMHG
Vapor Density:2.1
Spec Gravity:0.79
Evaporation Rate & Reference:1.4(N-BUTYL ACETATE = 1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR COLORLESS LIQUID,ALCOHOL ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MY YIELD CARBON
MONOXIDE AND OTHER TOXIC GASES

Disposal

Waste Disposal Methods:LAND FILL SOLIDS AT PERMITTED SITES. BURN
CONCENTRATED LIQUIDS IN SYSTEMS COMPATIBLE WITH WATER SOLUBLE
WASTES. AVOID FLAMEOUTS. ASSURE EMISSIONS COMPLY WITH APPLICABLE
REGULATIONS. DILUTE AQUEOUS WAS TE MAY BIODEGRADE. AVOID POISONING
PLANTBIOMASS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.